User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            HEA 4934A/4935A TRANSMISSION TEST SET            F-K001
DATE:                  20-Jul-93
AUTHOR:                User Contributed
REVISION:              1   F. Samonski   18 May 93   Added 4934A
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       29
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R D   N B            P J S         M              F        W
  1.002  DISP
  1.002  DISP         The Technician will need the HP 8903B connected to
  1.002  DISP         Port 0. The 8903B must be at address 28.
  1.003  DISP
  1.003  DISP         NOTE: Allow a minimum of thirty minutes for the UUT
  1.003  DISP         to warm-up before begining the Calibration.
  1.003  DISP
  1.004  CALL         HEA 4934A/4935A TRANSMITTER FLATNESS CALIBRATION
  1.005  CALL         HEA 4934A/4935A RECEIVER ACCURACY CALIBRATION
  1.006  CALL         HEA 4934A/4935A RECEIVER FREQUENCY CALIBRATION (5700A)
  1.007  CALL         HEA 4934A/4935A FILTER CALIBRATION
  1.008  CALL         HEA 4934A/4935A IMPULSE NOISE DAC CALIBRATION
  1.009  CALL         HEA 4934A/4935A HOLD TONE DROPOUT DETECTOR
  1.010  CALL         HEA 4934A/4935A DISTORTION CALIBRATION
  1.011  RSLT         {4KHz LOW PASS FILTER ID# MODEL & DUE DATE}
  1.012  DISP         CALIBRATION COMPLETE .
  1.013  END